Brompton TESSERA M2, User Manual

Page: 236 / 296

236
TESSERA - V3.0 | USER M ANUAL - REV B | 15.6 - TESSERA CONTROL
15.6 - TESSERA CONTROL
Fig 15.9 - Control application GUI
1. Download and install the Tessera Control application on a Windows or Mac com puter.
2. Run the application and select the relevant Network Interface from the drop-down.
3. Connect the com puter to the Net port on the processor’s back panel (either directly or via
switch).
4. Go to the Live Control property editor and select Tessera Control from the Control
Protocol drop down m enu.
5. Choose a channel num ber and set this in both the Tessera Control application and the
Live Control property editor.
The channel num ber is used to determ ine which processors are controlled by which
instances of the Tessera Control application. By selecting the sam e channel num ber on
m ultiple processors, they can be controlled sim ultaneously from a single instance of the
Tessera Control application.