Brompton TESSERA M2, User Manual

Page: 227 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 15.2 - PARAM ETER INDICATORS
227
Pipeline Tile St at us Descript ion
Of f line
The Of f line t ile appears in Tessera Remot e of f line project s. This
indicat es t hat t here is no processor connect ed and is t heref ore
of f line. This is t he only t ile f or an of f line project f ile, even when a
cont rol prot ocol has been select ed and will remain of f line unt il t he
project is connect ed t o a processor
Prot ocol not select ed
If a prot ocol has not been select ed, it will show a Disabled label. This
is t he def ault set t ing f or a new online Project File
Prot ocol select ed but
not receiving a valid
signal
When a prot ocol is select ed but a valid input signal is not det ect ed,
t he act ive light will be OFF and t he prot ocol name will remain in red
let t ers.
Prot ocol select ed,
receiving a valid
signal
When a prot ocol is select ed, t he syst em is conf igured, and a valid
DMX or eDMX signal is being received it will show t he prot ocol t ype
in green let t ers but t he act ive light will remain OFF. The paramet ers
will be responding t o t he GUI, and not t he incoming signal, because
live cont rol is not enabled.
Live Cont rol Enabled,
not receiving valid
signal
When a prot ocol is select ed but a valid input signal is not det ect ed,
t he act ive light will be ON but t he prot ocol name will remain in red
let t ers. The cont rolled sliders will def ault t o eit her t he last valid
signal received or t he GUI values bef ore live cont rol was enabled.
Live Cont rol Enabled,
receiving a valid
signal
When a prot ocol is select ed, t he syst em is conf igured, and a valid
DMX or eDMX signal is being received it will show t he prot ocol t ype
in green let t ers and t he act ive light will be ON. The processor
paramet ers included in t he select ed live cont rol prof ile will be
responding t o DMX.
15.2 - PARAMETER INDICATORS
When Live Control is enabled, the controlled param eters will display a red dot next to their GUI
control. They will display their current value but cannot be adjusted m anually until live control is
disabled.