Brompton TESSERA M2, User Manual

Page: 226 / 296

226
TESSERA - V3.0 | USER M ANUAL - REV B | 15.1 - ENABLING LIVE CONTROL
Protocol: Denotes the protocol which is being used to control the processor. This can be DMX
(via the 5 pin XLR input), Art-Net or sACN (via the network connection), or the Tessera Control
protocol which allows control of m ultiple processors from the Tessera Control application.
15.1 - ENABLING LIVE CONTROL
Live control can be enabled by double-clicking the pipeline tile or enabling from the property
editor. The pipeline tile displays the active button on when live control is enabled. Once
enabled, any param eters included in a selected control profile will go to the value defined by the
incom ing DMX, Art-Net or sACN signal. When live control is disabled the param eters will return
to the value set by the GUI before DMX was enabled.
N OTE If the DMX or eDMX signal is lost, changes will rem ain for as long as the Live Control
pipeline tile is enabled.
The Live Control pipeline tile indicates the six different states.