HSP Padding Installation
Page
1
of
3
FORM-03DOC-xxx Rev. 0
Parts Required:
Tools Used:
Step
Execution
Figures
1
Locate the front cross piece of the seat frame. Starting from under the
chair seat, pass one end of the thigh belt between the second and
third strap from the front of the seat
2
For Pedal Rocker attachment, locate the front frame piece attached to
the seat frame (resembles a handle)
3
Pass the other end of the Thigh Belt though the same spot in the chair
seat. Ensure that the center strap of the Thigh Belt is looped around
the front cross piece of the seat frame
4
One padded section of the Thigh Belt passes over each thigh. Connect
the snap buckles behind the chair. Do not fasten around the cylinder
or cable behind the chair. Tighten the straps as necessary