Brocade Communications Systems VDX 8770-4, Hardware Installation Manual, Page: 66 / 141

NOTE
For rails with round holes, use the clip nuts (see
Figure 34 on page 62) on the rack rails for securing 10-32
screws. For rails with square holes, use the retainer nuts (see Figure 34 on page 62). Also refer the following
figure.
FIGURE 38 Using clip nuts and retainer nuts to secure screws to rack rails
1. Clip nuts (for rails with round holes)
2. Retainer nuts (for rails with square holes)
3. Rail
4. Remove any existing rack-mount brackets from the device, and install the new Telco mid-mount brackets from the rack kit. See
the following figure.
Mounting the Device
Brocade VDX 8770-4 Hardware Installation Guide
66 53-1002563-10