manualshive.com logo in svg

Brocade Communications Systems DCX 8510-8, Hardware Reference Manual, Page: 20 / 176

Share
Download
Brocade Communications Systems DCX 8510-8 Hardware Reference Manual Download Page 20

Serviceability

The Brocade DCX 8510-8 provides the following features to enhance and ensure serviceability:

• Modular design with hot-swappable components.
• Flash memory that stores two firmware images per control processor.
• USB port on control processor blades for most tasks that formerly required an FTP/SCP server,

including software and firmware upgrades.

• Nonvolatile random-access memory (NVRAM), containing the OEM serial number, Brocade serial

number, revision information, and part number information.

• Background health-check daemon.
• Memory scrubber, self test, and bus ping to determine if a bus is not functioning.
• RASlog messages.
• SMI-S compliant.
• Hardware and software watchdog timers.
• Status LEDs.
• Predictive diagnostics analysis through Fabric Watch.
• SNMP (including version 3) integration with higher-layer managers.

Software features

The Fabric OS allows any Fibre Channel-compliant device to attach to the switches as long as it
conforms to the device login, name service, and related Fibre Channel standards. Each operating
environment requires that a Fibre Channel host bus adapter (HBA) be available with a standards-
compliant driver for correct interface to the fabric.

Fabric OS consists of a set of embedded applications running on top of an embedded Linux operating
system kernel. Some of these applications include:

• Name server
• Alias server
• Zone server
• Simple Network Management Protocol (SNMP) agent
• SMI-S compliant API
• Syslog auditing
• Reliable Commit Service (RCS)
• NTP
• Tasks to manage address assignment, routing, link initialization, fabric initialization, link shutdown,

Brocade DCX 8510-8 shutdown, and the user interface

Security

The following list highlights some of the key security features available for the Brocade DCX 8510-8
and for other Brocade enterprise-class products running Fabric OS 7.0.1 or later. For details, contact
your Brocade DCX 8510-8 supplier and refer to the Brocade White Paper, "The Growing Need for
Security in Storage Area Networks."

Serviceability

20

Brocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-08

Summary of Contents for DCX 8510-8

















































































































































































Reviews:

No comments