Brocade Adapters Troubleshooting Guide
61
53-1001582-01
Statistics
3
•
VLAN
This section provides an overview of these statistics and how to access them. For more detail, refer
to the
Brocade Adapter’s Adapters Administrator’s Guide
.
Authentication statistics
Use BCU commands and HCM to display statistics related to transmitted and received DH-CHAP
attempts for a selected port. You can display statistics such as the following:
•
The number of times security authentication failed
•
The number of times security authentication succeeded
•
The number of rejected transmitted Fibre Channel authentication attempts (Tx Auth Rjts)
•
The number of transmitted Fibre Channel authentication negotiation attempts (Tx Auth Negs)
•
The number of completed Fibre Channel authentication negotiation attempts (Tx Auth Dones)
•
The number of transmitted DH-CHAP replies (Tx DHCHAP)
•
The number of transmitted DH-CHAP challenge attempts (Tx DHCHAP Challenges)
•
The number of times a transmitted Fibre Channel authentication attempt was successful (Tx
DHCHAP Successes)
•
The number of rejected received Fibre Channel authentication attempts (Rx Auth Rjts)
•
The number of received Fibre Channel authentication negotiation attempts (Rx Auth Negs)
•
The number of completed received Fibre Channel authentication attempts (Rx Auth Dones)
•
The number of received DH-CHAP challenge attempts (Rx DHCHAP Challenges)
•
The number of received DH-CHAP replies (Rx DHCHAP Replies)
•
The number of times a received DH-CHAP challenge was successful (Rx DHCHAP Successes)
Displaying statistics through BCU
Use the following BCU command to display CEE statistics.
bcu auth --stats <port_id>
where:
<port_ID>
The ID of the Ethernet port. This could be the PWWN, port hardware path, or
user-specified port name. This could also be the adapter-index/port-index.
For example, to specify adapter 1, port 1 you would use 1/1 as the port
identification.
Displaying statistics through HCM
Display the Authentication Statistics dialog box using the following steps.
1. Select an HBA port from the device tree.
2. Select Configure > FC_SP > Authentication Statistics.
