security firewall name <name> default-action <action>
Defines the default action for a firewall rule.
Syntax
set security firewall name
name
default-action { accept | drop }
delete security firewall name
name
default-action [ accept | drop ]
show security firewall name
name
default-action
Parameters
name
Multi-node. The name of a firewall rule set. The name must not contain a space or any other of the following special
characters: |, ;, &, $, <, or >. The name can be as many as 28 characters long.
You can define more than one firewall rule set by creating more than one name configuration node.
accept
Accepts the default action for the specified rule set.
drop
Denies the default action for the specified rule set.
Modes
Configuration mode
Configuration Statement
security {
firewall {
name name {
default-action
accept
drop
}
}
}
Usage Guidelines
A firewall rule set is a named collection of as many as 9,999 packet-filtering rules. Following the configurable rules is an implicit
rule, rule 10000, which denies all traffic.
NOTE
The “deny all” rule stays in effect until every reference to the rule set is removed; that is, until every packet filter that
references the rule set has been removed from all interfaces.
Use the set form of this command to define an IP firewall rule.
Use the delete form of this command to delete a firewall rule.
Use the show form of this command to display a firewall rule.
Firewall Commands
Brocade 5600 vRouter Firewall Configuration Guide
53-1004253-01
53
Summary of Contents for 5600 vRouter
