Brobo OMRM 125 PRO, Operating Manual

Page: 16 / 69

15
5
OCCUPATIONAL SAFETY AND MEASURES
5.8 Earthing Requirements
Earthing system must be compatible with the features set out by IEC 64-8 standard. It must be compatible with
(IEC64; IEC364) standard for low-voltage equipment. Earthing procedures must be performed in consideration
of the voltage value. A stands for the marked point earthing inlet.
5.9 Noise Emission
There is no noise emitted by machine units, which will impact the health of employee.
5.10 Disposal of Hazardous Substances
In case the user uses equipment such as lubrication, cooling, etc., then apply the methods indicated on
respective labels.
5.11 Safety Equipment
Earthing system must conform to the specifications described in IEC 64-8 standard. It must be compatible with
(IEC64; IEC364) standard for low-voltage equipment. Earthing procedures must be performed in consideration
of the voltage value. A stands for the marked point earthing inlet.
DANGER!
Abolishment or deactivation of the safety measures taken on the machine and devices are
dangerous and forbidden!
A-) Main Switch
B-) Emergency Stop Button
C-) Saw Forward Buttons*
D-) Saw Housing**
* In order for the saws to move, the saw forward buttons must be pressed together.
** Saw housing is closed automatically during cutting.
D
A
B
C