SPECIFICATION SHEET
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
FEATURES
GRILLE & LIGHTING:
•
White polymeric grille
•
Snap-in light diffusing lens
•
Energy efficient lighting - uses one 27-watt (max.) high
efficiency GU24 based fluorescent lamp
vENTILaToR:
•
Resilient anti-vibration mounts
•
Plug-in, permanently lubricated motor
•
High performance blower wheel
HEaTER:
•
1500 watts, with metal blower wheel for efficient, even heating
•
Rotatable heater grille - direct heat where needed
•
Plug-in, permanently lubricated motor - functions independent
of ventilator
HOUSING:
•
Rugged galvanized steel housing
•
Polymeric, 4" round damper/duct connector
•
5-7/8" height allows for 2" x 6" (nominal) joist installations
•
Sturdy, easy, four-point mounting direct to joist
•
Hanger bars allow housing to be positioned anywhere
between 16" to 24"-on-center joists
•
Suitable for use in insulated ceilings (Type I.C.).
•
Use Model 66V (Ivory) / 66W (White) Three Function Control
NOTE: This product must be mounted in a flat ceiling only.
Installation in ceilings 9-foot high or less will provide maximum
comfort. Do not mount this product in a wall.
80A
99044120A
TYPICAL SPECIFICATION
Combination unit shall be Broan Model 100HFL.
Unit shall have galvanized steel housing and adjustable
mounting brackets.
Unit must be rated to handle a 27-watt (max.), GU24
based fluorescent lamp.
Fan, heater, and light shall be separately controllable.
Motor shall be permanently lubricated.
Heater to deliver 1500 Watts of fan-forced heat.
air delivery shall be no less than 100 cfm and sound
levels no greater than 2.0 sones . All air and sound
ratings shall be certified by HVI.
Unit shall be UL listed.
Combination unit to be suitable for use in insulated
ceilings. (Type I. C.)
MODEL 100HFL
VENTILATION FAN
WITH LIGHT AND HEATER
HVI-2100 certIfIed ratIngs comply with new testing technologies
and procedures prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
SPECIFICATIONS
VOLTS
AMPS
SONES
CFM
DUCT
120
14.0 *
2.0
100
4" Round
* Requires a dedicated 20-Amp circuit.
