2.2 U
SING THE
P
LATINUM
M
AIN
C
ONTROL
(
CONT
’
D
)
S
ETTING
P
ERIODS FOR PROGRAM MODE
D
AILY PERIODS DEFAULT SETTINGS
P
ERIOD
S
TARTING
H
OUR
M
ODE
P
ERIOD
1 (M
ORNING
)
6:00
AM
MIN
P
ERIOD
2 (D
AY
)
9:00
AM
20
MIN
/
H
P
ERIOD
3 (E
VENING
)
5:00
PM
MIN
P
ERIOD
4 (N
IGHT
)
11:00
PM
20
MIN
/
H
The Program Mode allows the user to customize the operation of his/her ventilation unit, for
week and weekend days. All days are divided in 4 periods. The periods starting hour and
ventilation speed are factory set (see below).
To change these values:
Press on
SET
key (
B
) for 3 seconds,
PROG
(for program) will appear on screen, and week
days will flash.
NOTE: You can exit Periods setting by pressing on
SET
key (
B
) for 3 seconds any time in
the process, or wait 60 seconds.
• Use to select between setting week days or weekend days.
• Press
SET
key (
B
) to confirm the choice, and go to setting daily Period 1.
(
Period 1
will appear on screen, and hour display will flash.)
• Use to select the period starting hour.
NOTE: Time changes by 15 minutes increments.
• Press
SET
key (
B
) to confirm and go to select the ventilation speed or type (will flash
on screen).
• Use to select the ventilation speed or type.
• Press
SET
key (
B
) to confirm and go to daily Period 2.
(
Period 2
will appear on screen, and hour display will flash.)
Proceed as for Period 1 for all daily periods. Once the ventilation speed or type for daily
Period 4 has been selected:
• Press
SET
key (
B
) to confirm.
NOTE : If the week days were the first to be set, the weekend days will appear on screen;
but if the weekend days were the first to be set, then the week days will appear on
screen.
(
Period 1
will appear on screen, and hour display will flash.)
• Set periods as described above.
11
3
4
5
7
13
13
Pressing on
MODE / PREF
key (
D
) successively allows to go from
Ventilation
mode to
Recirculation
mode and then to
Program
mode (
VENT
,
RECIRC
and
PROG
on
control screen).
• In
Ventilation
Mode, use to change the ventilation speed (displayed in
in all options except
RECIRC
).
• In
Recirculation
mode, use to change the recirculation speed (displayed
in , OFF, MIN, MAX).
• In
Program
mode, use to review the period settings without changing
them (the period icons are displayed in ).
Pressing once on
A
allows to turn the ventilation unit in Smart mode. On this mode, the
ventilation unit operation will be driven by the outdoor temperature and by the indoor
conditions. Press once more to exit Smart mode.
