- 2 -
1. INSTALL DUCTWORK
Plan where and how the ductwork will be installed. Install proper-sized ductwork, elbows and roof or wall cap for the
type of blower you are installing. Use 2” duct tape to seal duct joints.
NOTE:
When performing vertical exhaust ductwork, there must be at least 14” high free inside cabinet in order to
allow cabinet blower installation.
The minimum hood distance above cooktop must not be less than 24”. A maximum of 30” above cooktop is
highly recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users discretion.
Hood
Roof ca
p
Wall
ca
p
HH0045A
24" minimum a
b
ove
cookin
g
s
urface
Ca
b
inet
b
lower
3
¼" x 14" duct
OR
3
¼" x 10"
3
¼" x 14" to
3
¼" x 10" ada
p
tor
model T461 (o
p
tional)
Hood
7" OR
8
" round duct
Roof ca
p
Wall
ca
p
HH0046A
24" minimum a
b
ove
cookin
g
s
urface
Ca
b
inet
b
lower
Tran
s
ition model 459
3
¼" x 14" to
8
" OR
model T460
3
¼" x 14" to 7"
2. PREPARE THE INSTALLATION
Make sure that the following items are included:
- Hood
- Accessories:
• Filters (2 for 30’’ and 36’’ width hoods, 3 for 42’’ width hood)
• Cabinet blower including left and right flow deviators (assembled to cabinet blower)
• Electrical cable with 3-prong receptacle (inside one filler)
• 3
1
⁄
4
” x 14” adapter/damper (inside one filler)
• Bag of parts (inside one filler) including:
(2) wire clamps, (5) #8 x
1
⁄
2
” screws, (3) wire connectors, (9) #8 x
3
⁄
8
” screws
Parts sold separately:
- Halogen lights (MR16, GU10, 120V, 50W)
- Transition 3
1
⁄
4
” x 14” to 8’’ round model # 459 (optional), transition 3
1
⁄
4
” x 14” to 7’’ round model # T460 (optional),
adaptor/damper 3
1
⁄
4
” x 14” to 3
1
⁄
4
” x 10” model T461 (optional), ducts, elbows, dampers, wall or roof caps. Refer to
page 1 for a complete list of venting options and model number.
NOTES: 1. During installation, protect countertop and/or cooktop.
2. If the bottom of the cabinet is recessed, attach three 1” width wood strip (not included). Refer to figure
below for wood strips proper location.
HO0045A
CABINET BOTTOM
1¾’’
1¾’’
10¼’’
1”
1”
1”
