- 11 -
12. LIGHT BULBS
This range hood uses 50W halogen lamps. (120V, 50W, PAR 20)
Install the lamps by rotating them clockwise into their socket holder.
13. HEAT LAMPS
The heat lamps required are 120V, 175W max, infrared bulbs. (120V, IR 175W, PAR 38)
White halogen lights can be used if warming shelves are not used. (120V, 90W, PAR 38)
Install the lamps by rotating them clockwise into their socket holder.
14. INSTALL FILTERS
It is recommended to install side filters first and finish with center one(s).
1.
Insert upper end of filter into the hood (tab end).
2.
Raise lower end toward the inside of hood.
3.
Position lower end of filter into channel and pull on filter tab.
4.
While pulling the filter tab, slide the filter top under the inner retaining piece.
Baffle filters are available as an option (see instruction sheet included with baffle filters).
HD0009
HD0010
15. USE AND CARE
Grease filters and impeller(s).
The grease filters, impeller(s) and grease rail should be cleaned frequently. Use a warm detergent solution.
Grease filters and impeller are dishwasher safe.
Remove filters by pushing filters towards the back of hood and rotating filters downward.
1
1) Tabs
