broag SEAGOLD 1A HR, Manual

Page: 116 / 259

3
PREFACE
* On request extension cables can be delivered, so that
the gas train can be fitted on the opposite side to the
instrument panel, thermostat pocket and the flow.
If you have any questions, or if you need more informa-
tion about specific subjects relating to this boiler, please
do not hesitate to contact us.
The data published in these technical instructions is ba-
sed on the latest information and is subject to revisions.
We reserve the right to modify the construction and/or
design of our products at any moment, without being
obliged to adjust earlier supplies accordingly. These technical instructions contain useful and important
information for the proper operation and maintenance of
the remeha model Gas 3d central heating boiler.
Furthermore, important instructions are given to prevent
accidents and serious damage before commissioning and
during operation of the boiler, to ensure safe and trouble
free boiler operation. Read these instructions carefully
before putting the boiler into operation, familiarize your-
self with its operation and control and strictly observe the
instructions given.
The remeha Gas 3d boiler is a cast iron sectional boiler
with atmospheric burners.
Suitable for all qualities of natural gas, cat.
I 2 H (20 mbar).
The boiler meets the requirements of the CE regulations
at the following directives:
- Gas appliance directive no. 90/396/EEC
- Efficiency directive no. 90/42/EEC
- Electrical low voltage directive no. 73/23/EEC
- Machinery directive no. 89/392/EEC
- E.M.C. directive no. 89/336/EEC.
Classification type for evacuation of the combustion
products: B11 BS.
For further advice or information contact Broag Ltd.
The remeha Gas 3d is supplied with electronic ignition
and insulated casings.
Water connections: Ø 70 mm int.
1. BOILER DESCRIPTION
2.1 General
- Boiler block of cast iron sections are joined together
with conical nipples.
- Gas train and water connections can be fitted on either
side of the boiler.
The gas train should as standard always be fitted
on the same side as the instrumental panel,
thermostat pocket and the flow*.
- Instrument panel is fitted in the front casing.
- Cleaning of the cast iron block from top of the boiler.
2.2 Burners
The burners are cast iron, atmospheric
reminox ® -bur-
ners. They guarantee a low noise level and a low NOx-
emission.
2.3 Boiler base
The Broag remeha Gas 3d boiler is supplied as standard
with reflecting floor plates with ventilation underneath.
2.4 Assembly
The boiler must be assembled on site.
2. CONSTRUCTION