Using Broadcom Advanced Control Suite 4
NetXtreme
User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R
Page 84
3.
Click the
Create Team
tab.
4.
Click the
Team Name
field to enter a team name.
5.
Click the
Team Type
field to select a team type.
6.
Assign any available adapter or adapters to the team by selecting the adapter from the
Load Balance
Members
list. There must be at least one adapter selected in the
Load Balance Members
list.
7.
You can assign any other available adapter to be a standby member by selecting it from the
Standby
Member
list.
The Large Send Offload (LSO), Checksum Offload (CO), and RSS indicate if the LSO, CO, and/or RSS
properties are supported for the team. The LSO, CO, and RSS properties are enabled for a team only when
all of the members support and are configured for the feature.
Note:
The
Create Team
tab appears only if there are teamable adapters available.
Note:
There must be at least one Broadcom network adapter assigned to the team.
Summary of Contents for NetXtreme BCM57 Series
