Using Broadcom Advanced Control Suite 4
NetXtreme
User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R
Page 83
Using Expert Mode
Use Expert Mode to create a team, modify a team, add a VLAN, and configure LiveLink for a Smart Load
Balance and Failover and SLB (Auto-Fallback Disable) team. To create a team using the wizard, see
.
To set the default Teaming Mode, select
Options
from the
Tools
menu, then select
Expert Mode
or
Wizard
Mode
(the default is Wizard Mode).
Creating a Team
1.
From the
Teams
menu, select
Create Team
, or right-click one of the devices in the “Unassigned Adapters”
section and select
Create a Team
. This option is not available if there are no devices listed in the
“Unassigned Adapters” sections, which means all adapters are already assigned to teams.
2.
Click
Expert Mode
.
Note:
Enabling Dynamic Host Configuration Protocol (DHCP) is not recommended for members of an
SLB type of team.
Note:
If you want to always use Expert Mode to create a team, click
Default to Expert Mode on next
start
.
Summary of Contents for NetXtreme BCM57 Series
