Troubleshooting
NetXtreme
User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R
Page 162
4.
Power down the machine, remove AC power from the machine, and then reboot the system.
5.
Remove and re-install the diagnostic software.
6.
Contact your hardware vendor.
BACS Network Test Failures
failures are the result of a configuration problem on the network or with
the IP addresses. Below are common steps when troubleshooting the network.
1.
Verify that the cable is attached and you have proper link.
2.
Verify that the drivers are loaded and enabled.
3.
Replace the cable that is attached to the NIC/LOM.
4.
Verify that the IP address is assigned correctly using the command "ipconfig" or by checking the OS IP
assigning tool.
5.
Verify that the IP address is correct for the network to which the adapter(s) is connected.
Summary of Contents for NetXtreme BCM57 Series
