manualshive.com logo in svg

Broadcom G610, Hardware Installation Manual

Share
Download
Broadcom G610 Hardware Installation Manual Download Page 8

53-1004408-11 Installation Guide

 

Brocade

®

 G610 Switch Hardware Installation Guide

Device Overview

Hardware Features

The Brocade G610 Switch offers the following features and capabilities:

•

Up to 24 autosensing ports supporting 32G SFP+ technology in a single domain.

•

Dynamic Ports on Demand (Dynamic-POD) scaling from a base configuration of 8 ports to 24 ports (two 8-port SFP+

POD).

•

4, 8, 16, and 32G auto-sensing Fibre Channel switch ports.

–

A 32G optical transceiver can autonegotiate to 32G, 16G, or 8G.

–

A 16G optical transceiver can autonegotiate to 16G, 8G, or 4G.

NOTE

The port speed is determined by the maximum speed. The port speed is supported by the optical

transceivers at either end of the link.

•

Universal ports self-configure as an E_Port, F_Port, N_Port, or D_Port.

–

A Diagnostic Port (D_Port) provides diagnostics, troubleshooting, and verification services for the physical media.

•

One built-in fixed power supply unit with a port-side power inlet. This power supply is not a field replaceable unit (FRU).

•

Four integrated fans (no fan FRUs) for cooling the system. This functionality allows a single fan failure and permits the

switch to continue to function properly if a fan fails. Only nonport-side intake airflow for cooling is supported.

 

53-1004408-11

8

Broadcom

Summary of Contents for G610











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands