manualshive.com logo in svg

Broadcom G610, Hardware Installation Manual

Share
Download
Broadcom G610 Hardware Installation Manual Download Page 22

53-1004408-11 Installation Guide

 

Brocade

®

 G610 Switch Hardware Installation Guide

Attaching the Device to a Rack

Complete the following steps to install the device in the rack.
1. Position the device in the rack as shown in the following figure, providing temporary support under the device until the

rail kit is secured to the rack.

2. Attach the right front bracket to the right rack rail using three 10-32 x 5/8-in. screws and three 10-32 retainer nuts.
3. Attach the left front bracket to the left rack rail using three 10-32 x 5/8-in. screws and three 10-32 retainer nuts.
4. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in.-lbs (29 cm-kgs).

Figure 5: Attaching the Device to a Rack

1. Bracket, Front Right

2. Screw, 10-32 x 5/8-in. Panhead Phillips

3. Retainer Nut, 10-32

Attaching the Rear Brackets to the Rack

NOTE

Do not use the rear brackets for the Brocade 6505, 6510, or 6520 switches.

 

53-1004408-11

22

Broadcom

Summary of Contents for G610











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands