CVPM02, CVPM05, CVFM04 User Guide
CVPM02, CVPM05 Power Modules | CVFM04 Cache Module
Attaching the CVPM to the Clip on the Remote Mount Board
Follow these steps to attach the CVPM to the clip on the remote mount board.
1. With the remote mount board on a flat, clean, static-free surface, ground yourself, and make sure that the system
is grounded.
2. Remove the CVPM from the package.
3. Press the CVPM into the clip on the remote mount board until the module clicks firmly into place, as shown in the
following figure.
Figure 4: Connect the CVPM to the Clip on the Remote Mount Board
Broadcom
CVPM02-05-CVFM04-UG101
11
Summary of Contents for CVFM04
Page 22: ......
