X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
LED Purpose
Color
Status
Recommended Action
Slow-flashing amber (on 2
seconds, then off 2 seconds)
The port is disabled due
to diagnostic tests or
the
portDisable
or
portCfgPersistentEnable
commands.
Reset the port from the
workstation using the
portDisable
or
portCfgPersistentEnable
command.
Fast-flashing amber (on 1/2
second, then off 1/2 second)
The transceiver or port is faulty. Change the transceiver or reset
the switch from the workstation.
Alternating green/amber
The port is beaconing.
No action is required.
Interpreting FC64-48 Port Blade LEDs
See the following figure and table to interpret the LED patterns for the FC64-48 blade. The LED patterns temporarily
change during POST and other diagnostic tests.
Figure 27: FC64-48 Port Blade LEDs
1. Blade Power LED
2. Blade Status LED
3. Status LED for Right FC Port
X7-8-Install-IG100
74
Broadcom
Summary of Contents for Brocade X7-8
Page 212: ......