Broadcom BCM5706C, User Manual

Page: 106 / 247

NetXtreme II User Guide
January 2010
Bro a d c o m C o rp o r a ti o n
Page 106 Modifying Management Applications Document ENGSRVT52-CDUM100-R
Type the following:
setup /s /v"/qn ADDSOURCE=BACSa64,CHMa64,BASPa64,SNMPa64"
To perform a silent install from within a batch file
To perform a silent install from within a batch file and wait for the install to complete before continuing with the next command
line, type the following:
start /wait setup /s /w /v/qn
M
ODIFYING
M
ANAGEMENT
A
PPLICATIONS
To modify the management applications
1. In Control Panel, double-click Add or Remove Programs .
2. Click Broadcom Management Programs and then click Change .
3. Click Next to continue.
4. Click Modify to change program features.
5. Click Next to continue.
6. Click on an icon to change how a feature is installed.
7. Click Next .
8. Click Install .
9. Click Finish to close the wizard.
10. Reboot your system to complete the modification of the management applications.
R
EPAIRING
M
ANAGEMENT
A
PPLICATIONS
To repair or reinstall the management applications
1. In Control Panel, double-click Add or Remove Programs .
2. Click Broadcom Management Programs , and then click Change .
3. Click Next to continue.
4. Click Repair to repair errors in installed applications.
5. Click Next to continue.
6. Click Install .
7. Click Finish to close the wizard.
R
EMOVING
M
ANAGEMENT
A
PPLICATIONS
To remove all management applications