Broadcom AFBR-S50, Quick Start Manual

Page: 22 / 33

Broadcom AFBR-S50-EK-UG102
22
AFBR-S50
User Guide Evaluation Kit Quick Start Guide
2.4 Tool Panel Overview
This section introduces the tool panel which is located on the right side of the explorer GUI.
Figure 32: Location of the Tool Panel in the GUI
2.4.1 API Tab
In general, this tab is organized in the three categories: Generic API, Configuration API, and Calibration API. All functions
and accessible parameters shown in this section give an overview about the interoperability with an AFBR-S50 sensor. As
indicated in
Figure 33 , applicable settings have a
Get
,
Set
, or both button on the right side to either retrieve the current
parameter setting from the sensor (
Get
) or send a new target setting to the sensor (
Set
).
Figure 33: Configuration API with Get/Set Buttons
Generic API
When the connection to the evaluation board is established, the Generic API section is filled with important information on
the device, such as the API and explorer version number, module type, chipID, and so on.