Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
10.206 perd
cmd:
perd
Description:
Disable parity error response on a bridge. Defaults to current bridge.
Syntax:
perd <bridge>
10.207 peclr
cmd:
peclr
Description:
Clear parity error on bridge. Defaults to current bridge.
Syntax:
peclr <bridge>
10.208 pechk
cmd:
pechk
Description:
Check parity error on bridge. Defaults to current bridge.
Syntax:
pechk <bridge>
10.209 iscsiprg
cmd:
iscsiprg
Description:
Program ISCSI firmware into NVRAM. This command reads ISCSI code
from a file and program into NVRAM. There are 2 types of ISCSI firmware image. One
only contains ISCSI Boot Firmware. The other also contains ISCSI CFG Block and ISCSI
CFG Program. ISCSI Boot Firmware will be programmed by default. ISCSI CFG Block
will be programmed if either there is no ISCSI CFG Block present in NVRAM or “-c”
option has been entered. ISCSI CFG Program will be programmed only when “-p” option
has been entered.
Syntax:
iscsiprg [-f<filename>] [-c] [-p]
Options:
-f<filename> ISCSI firmware file name.
-c Forced to program ISCSI CFG FW
-p Forced to program ISCSI CFG Program.
10.210 umpecho
cmd:
umpecho
page 133
Broadcom Confidential and Proprietary
