BRNKL Rapid Deploy, Setup Manual

Page: 59 / 114

Ready float switch
Add a float switch
| 57
Ready float
switch
Get your BRNKL Rapid Deploy ready
to deploy with a float switch.
To ready your Rapid Deploy for a
float switch, follow these steps:
①
Select input port
②
Set float switch settings
①
Select an input port
Assign an input port to a device.
To select an input port:
1. On the connection panel, select an
available
INPUT
port.
2. Make a note of the device,
location, and
INPUT
.
INPUT 1 | 2 | 3 | 4