![BRK electronic SL177 Quick Start Manual Download Page 1](http://html1.mh-extra.com/html/brk-electronic/sl177/sl177_quick-start-manual_2815307001.webp)
120V AC, 60Hz Wire-in
S T R O B E
L I G H T
HEaRInG ImpaIREd
CaT.
SL177
Listed to
Standard
UL 1971
Description:
SmaRT STROBE
Separate flash patterns to
distinguish between smoke and
carbon monoxide
177 CandELa
XEnOn STROBE
Powerful 177 candela xenon
strobe light provides effective
visual warning to hearing
impaired residents
1Hz FLaSH RaTE
60 flashes per minute rate meets
ADA, ANSI 117.1, NFPA 72 and
UL1971 requirements for visual
signal devices
BRK Model SL177 is an ADA hearing impaired strobe light specifically designed for
residential and institutional applications including sleeping rooms of hospitals, hotels,
motels, dormitories, and other multifamily dwellings as defined in standard NFPA 101.
Model SL177 has been fully tested and complies with Americans with Disabilities Act
(ADA), Underwriters Laboratories, Inc. Signaling Devices for the Hearing Impaired UL1971,
ANSI 117.1, CSFM, NFPA 72, and NFPA 101 and with model building codes published by
the ICC.
BRK Model SL177 is a state of the art Strobe Light designed to provide hearing
impaired individuals with a visual warning of a fire or a carbon monoxide danger when
used with smoke, heat or carbon monoxide alarms. The Smart Strobe has separate flash
patterns to distinguish between smoke/heat and carbon monoxide dangers. These
different patterns are to help a hearing impaired person better distinguish the danger
present. The 177 candela Xenon strobe meets UL 1971 requirements and flashes at a
rate of an average of 60 times a minute. The SL177 operates on 120V AC and features
a green LED that signals the unit is receiving power. Interconnectable with up to 18
devices, of which 12 can be smoke alarms. Model SL177 was designed with quick and easy
installation in mind. Designed to co ver most drywall cut-outs, the specially designed mounting
bracket mounts on any electrical box up to 4" octagonal and does not require screw removal.
Connection to AC power is made with a “Quick-Connect” wiring harness.