Britax ONE4LIFE CLICKTIGHT Series, User Manual

Page: 27 / 55

48 49
Table of Contents Table of Contents
Installing the Anti-Rebound Bar Cover (For models with anti-rebound bar)
1. Slide the cover on the black
portion of the anti-rebound
bar.
2. Attach the small elastic
loops to the plastic tabs.
3. Install the anti-rebound
bar. Insert the anti-rebound
bar into the two openings at
the front of the seat.
4. Attach
elastic bands from
the cover to the hooks on the
shell.
5. Pull the anti-rebound bar to
ensure it is properly set.
Shell
SPONGE CLEAN the shell
using warm water and mild
soap.
TOWEL DRY
DO NOT
• Use abrasive
-- cleaners
Cover
Refer to product care label
for wash instructions
If care label indicates
machine washable, always
refer to us.britax.com/
faqs for important care
information.
Before washing, ensure
all the hook and loop
fasteners are secured.
DO NOT
• Bleach
• Iron
Harness
SPONGE CLEAN the
harness using warm water
and mild soap.
TOWEL DRY
DO NOT
• Disassemble
the harness
• Bleach
• Machine wash
• Machine dry
• Iron
Harness
Buckle
THOROUGHLY RINSE the
buckle using warm water.
TEST THE BUCKLE by
fastening and unfastening
until a click is heard after
inserting each buckle
tongue. If clicks are not
heard, repeat the cleaning
procedure.
TOWEL DRY
DO NOT
• Soak
• Lubricate
• Use solvents
• Use soap or
household
detergents
Cleaning