ENGLISH
5
C How the BRITA Cartridge Status Indicator works
To ensure optimal performance, you should change the filter car-
tridge on a regular basis. The BRITA Cartridge Status Indicator in the
BRITA lever tells you when to change the filter cartridge.
D Signals
The three lights in the BRITA lever are only activated in the filtering
position. They indicate:
-
Green light: The BRITA filter is working at optimum performance.
-
Yellow light: 90% of the filter capacity has been used. Remem-
ber to buy a new replacement filter cartridge.
-
Red light: The filter cartridge is exhausted and needs to be changed.
Technical data:
• Battery: 1x CR2032 (removable)
• lifetime of battery: app. 2 years
!
Do not immerse Cartridge Status Indicator in water.
(fig. 4)
1. Cartridge
Button
2. Hardness
Button
3. Reset
Button
1 LED 2 LEDs 3 LEDs
water hardness setting (HARDNESS) C
B
A
cartridge setting (CARTRIDGE)
A 1000 P 1000 P 3000
Step 3: Installing the 3-way water filter tap
To install the 3-way water filter tap, firstly ensure you have all the
components required.
!
Please, make sure that there is enough room and access
under the sink to allow for the installation of the filter head
and cartridge, and to connect all hoses.
1. 3-way water filter tap with 3 hoses
2. BRITA Cartridge Status Indicator
3. Base & 0-Ring
4. Joint (Is only necessary for installa-
tion of the tap if you directly mount
it onto your sink. If you mount it
onto your worktop, you do not
necessarily need this part. It helps
stabilizing the tap on your sink)
5. Flat Gasket
6. Plate
7. Screw nut
8. 2 screws
6.
7.
8.
1.
2.
3.
4.
5.
(fig. 5)
Design may differ from
image shown