Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
10-21
see .
Set the oil cooler to the bracket on the engine and on the cooler necks gradually install
and tight the nuts. Install the fittings with oil hoses, screw the fitting nuts.
Fill the oil system with oil (see 10.5.1) and check oil system tightness.
Install the lower and upper engine cowling.
10.3.9
Removal of the radiator
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 10, 17
screwdriver
see Fig. 10-18.
Remove the upper and lower engine cowling.
Drain the cooling liquid from the cooling system (see 10.5.2.2).
Disconnect hoses from the radiator outlets.
Remove four bolts attaching the radiator to the upper and lower brackets.
Remove the radiator.
10.3.10 Installation of the radiator
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 10, 17
screwdriver
see Fig. 10-18.
Install the radiator on upper and lower brackets.
Install hoses on the outlets from the radiator and secure them with hose fasteners.
Fill the cooling system with cooling liquid (see 10.5.2.3) and check system tightness.
Install the lower and upper engine cowling.
Summary of Contents for S-LSA
Page 2: ......
