Bath Pop-Up Wastes
Fitting Instructions
& Contents List
(W BTH PU1 C/G)
(W BTH PU2 C/G)
(W BTH PU3 C)
Please keep these instructions for future reference and request of
replacement part
Before starting any installation project please consider:
Prior to drilling into walls, check there are no hidden electrical
wires, cables or water supply pipes with the aid of an electronic
detector. If you use power tools do not forget:
- Wear eye protection
- Unplug equipment after use
SAFETY
NOTE
(FI W BTH PU1,2,3)
(Rev.D7)
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to preserve the
visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean your
pop-up waste is to wipe with a soft damp cloth. Stains can be removed using washing
up liquid. All bath cleaning powders and liquids will damage the surface of your fitting,
even the non-scratch cleaners.
Installer please fill in code here
Bristan Group Limited
Birch Coppice Business Park
Dordon
Tamworth
Staffordshire
B78 1SG
UK
A Masco Company
Website: www.bristan.com
Telephone: 0844 701 6274
Facsimile: 0844 701 6275
Email:
NOTE: Never use abrasive detergents or
disinfectants or those containing alcohol, hydrochloric acid or phosphoric
acid.
PRODUCT IDENTIFICATION CODE LASER ETCHED ON PRODUCT
.
TELEPHONE HELPLINE: 0844 701 6273
Bristan recommend E-Cloth for cleaning all of our bathroom
& kitchen products. Using just water, E-cloth gives a smear
free, deep clean by breaking up and holding dirt, which
normal cloths leave behind. Order through your Bristan
stockist. (ORDER CODE: ECLOTH)