Bristan ST PUMP 15TN, Installation, Operation & Maintenance Instructions Manual

Page: 27 / 32

25
11 TECHNICAL SPECIFICATION (TWIN MODELS)
Pump Model 1.5 bar Twin
44435
2.0 bar Twin
44436
General Guarantee 3 years
Approvals UKCA, CE
Features Pump type Peripheral
Pump control Flow switch
Anti-vibration feet  
Flexible hoses 4 4
Dry run protection  
Typical noise 57 dB(A) 57 dB(A)
Performance Maximum head - closed valve 1.5 bar (15 metres) 2.0 bar
(20 metres
Performance @ 9 l/min 1.1 bar (11 metres) 1.5 bar
(15 metres)
Performance @ 18 l/min 0.6 bar (6 metres) 0.9 bar
(9 metres)
Maximum flow 32 l/min 37 l/min
Maximum static inlet pressure 10 metres
Maximum working pressure* 380 kPa (3.8 bar)
Maximum ambient air temperature
40 °C
Min / Max water temperature**
Min 4 °C / Max 65 °C
Flow switch sensitivity 0.8 l/min (approx)
Materials Pump body Plastic
Impeller Plastic
Mechanical seal EPDM / PTFE / Al. Oxide
Connections Pump connections G ¾ male
Flexible hoses Connections (UK model) G ¾ female x 15 mm push-in x 210 mm
long, isolating valves on inlet hoses
Motor Type Induction (auto-reset thermal trip)
Duty rating Continuous (S1) @ 9 l/min and
above***
Electrical Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 385 Watts 420 Watts
Current - full load 1.7 Amps 1.8 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres
(pre-wired to terminal block)
Physical Enclosure protection IP22
Length 231 mm
Width 132 mm
Height - excluding hoses 171 mm
Weight - including fittings 4.7 Kg