Briot emotion, Operation Manual

Page: 200 / 210

6-199
=> Tests
6.2 OPERATING PRINCIPLE
6.2.1 O
PERATING PRINCIPLE OF A TYPICAL SCREEN
6.2.1.1 T
ESTS INVOLVED
The following test screens operate on the same principle:
• Lens feeling
• Lifting jack movement
• Wheel unit translation movement
• Lens rotation
• SBGD Exit/Return
• Visor Opening/closing
• Wheel rotation
• Opening/closing of lens clamp shaft
6.2.1.2 P
ROCEDURE
The operating principle is as follows:
Flow chart 6-1: Operating principle of a typical test screen
6.2.1.3 T
EST SEQUENCE
>
Tests must be undertaken in a logical sequence.
>
The tests which appear grayed cannot be carried out so long as the previous accessible test has not been
started.
Example: The lens rotation test cannot be undertaken if the lens feelers, lifting jack movement and
wheel unit translation movement tests have not already been carried out.
#1 Initialise the movement [mandatory].
#2 Enter a percentage of «one-way» movement.
OR
#2 Enter a percentage of «return» movement.
#3 Enter the number of cycles to be completed.
#4 Enter a power percentage.
#5 Start the test.