8
1019097-B
English Manual
ASSEMBLY
20
3
12
11
x2
1.
Align the Clevis (20) to
the Drawbar (3).
- Attach the clevis from beneath with two
5/16" x 1" Hex Head Bolts (
11
).
- Secure with two 5/16" Nylock Nuts (
12
).
Step 1-B
NOTE: Leave nuts loose on this step, allowing the End Panels (1) to be adjusted later.
x6
Align an End Panel (1)
with the Aerator Tray (5).
- From beneath, run three
5/16" x 3/4" Hex Head Bolts (
10
)
through the tray and end panel.
- Add a 5/16" Flat Washer (
14
) to each bolt.
- Add three 5/16" Hex Nuts (
12
), DO NOT TIGHTEN FULLY.
NOTE: These will be adjusted and secured on Step 4-B.
Repeat on the other end of the tray (5).
12
+
14
10
1
5
Step 2
12
14
12
11
10
