Manual for
brinkmann
brinkmann
brinkmann
brinkmann
Preamplifier CALVIN
Design :
Service :
Brinkmann Audio
Ing.-Büro R. Klatt-Milsmann
Im Himmelreich 13
Deppendorfer Str. 151
88147 Achberg
33793 Bielefeld
Germany
Germany
Tel.: 08380 / 981195
Tel.: 05203 / 883033
Fax: 08380 / 981233
Fax: 05203 / 883034
www.brinkmann-audio.com
Legal regulation of the European Community :
This amplifier had been designed and testet according to the guidelines IEC55013 and
IEC55020, and it meets the safety requirements IEC60065.
Informations for safety :
The preamplifier CALVIN is only to be used in dry rooms with an average temperature and
is only allowed for 220-240V, 50Hz alternating current.
The power supply is only to be connected to sockets with
Please connect or disconnect only when the amplifier is not connected to the mains.
The amplifier is not switched off in the stand-by modus.
Always disconnect the amplifier from the mains when it is not used for a longer period of
time ( during holidays etc. )!
Never lift or remove the glass plate while the amplifier is connected to the mains!
Attention, dangerous voltage!
Repairs, modifications etc. are only to be carried out by the company
brinkmann
itself or
by specially authorized workshops! Please allow some time before lifting the glass plate, so
high voltages can reduce.
Always keep the amplifier away from wet, heat and open fire. Don't expose it to the blazing
sun! Never place receptacles with fluids on the amplifier.
