1 Overview
18/02/2021
bplogic intelligent pump controller
7
1 Overview
1.1 Preliminary remarks
Information regarding this operating manual
This operating manual (subsequently referred to as “Manual”) contains impor-
tant information that must be observed when installing, operating and maintain-
ing the bplogic intelligent pump controller (subsequently referred to as “pump
controller”). This operating manual must therefore be read by the electricians
and the responsible technical personnel/owner prior to assembly and commis-
sioning and must always be available at the pump controller’s operating loca-
tion.
Illustrations in this operating manual are for basic understanding and may differ
from the actual design.
Complete installation
The pump controller is part of a system to supply machine tools with cooling lu-
bricant. “Complete installation” or “system” designates all of the installations,
machines, sensors, and actuators controlled by the pump controller, as well as
their safety equipment.
The pump controller and the complete installation are considered
a functional unit here even if the complete installation is not sup-
plied as standard.
Further applicable documents
In addition to this operating manual, also observe the documentation for all ma-
chines and other installations contained in the complete installation, as well as
the documents relevant for assembly and safety:
Documentation for:
Machines (e.g. pumps)
Frequency converters
Actuators (e.g. valves)
Sensors (e.g. throughput, pressure sensors)
Safety equipment
Other installations