7 Performing maintenance
18/02/2021
bplogic intelligent pump controller
259
7.3 Event messages
The pump controller uses three types of event message to inform you of the system
state:
Icon
Type of
event message
Description
Error message
Reports software and hardware faults. An
error message that has triggered can cause
application modules to be switched off auto-
matically and operational readiness signals to
be reset.
Warning mes-
sage
Reports software and hardware faults. Warn-
ing messages being triggered do not cause
any application modules to be switched off or
operational readiness signals to be reset.
Information
Reports system status changes, e.g. a
changed speed for the I/O cycles. Information
being triggered does not cause any applica-
tion modules to be switched off or operational
readiness signals to be reset.
7.3.1 Layout of an event message
Event messages are displayed in the
“Detailed event message”
dialogue box
(Fig. 181). All event messages are laid out according to the following principle: