5.2.6 Factory setting connected device
A device has been connected to the Air Control - Allure clock thermostat. It is possible to set back all this device’s
settings to the factory settings. Perform the following actions for this:
▪
Press returnkey "
2
" as many times as necessary to get to
the main screen
▪
Pressetting knob "
1
" ‘Main Menu’ opens
▪
Select ‘Installation Settings’ by turning setting knob "
1
".
▪
Press setting knob "
1
"; ‘Installation Settings’ opens
▪
Select ‘Installer’ by turning setting knob "
1
".
▪
Press setting knob "
1
"; ‘Installer’ opens
▪
Select ‘Factory Setting’ by turning setting knob "
1
".
▪
Press setting knob "
1
";‘Factory Setting’ opens
▪
Turn setting knob "
1
" to select the option 'yes'
▪
Press setting knob "
1
" to confirm the desired 'Factory
Setting'.
▪
The settings are put back to the factory settings.
Selecting factory setting will restore all step numbers to
the original factory setting. All fault messages will be
deleted as well.
Air Control - Allure clock thermostat 616720-A
Brink / 23
