Canopy Brightz
™
Instructions
©
Copyright Brightz, Ltd. 2018
Patent Pending • All rights reserved
Step 1 – Install Batteries
Open latches on the side of the battery pack to access batteries. Install 3 fresh AA batteries,
observing correct polarity (+/-). Close the battery pack, making sure the latches snap shut.
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable
(nicad, ni-mh, etc.) batteries.
Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of in fire,
mixed with a different battery type, or inserted backwards. Replace all used batteries at the same
time. Clean battery contacts and contacts on the device prior to installing. Remove batteries if item
will not be used for long periods of time. When battery expires remove promptly.
Step 2 – Install Battery Pack
Attach the battery pack to the frame of your canopy or patio umbrella using the included silicon
strap.
We recommend:
•
For canopies, place on one of the collapsible braces at the top of the canopy leg.
•
For patio umbrellas, place near one of the umbrella points.
Take the silicon strap and loop one of the end holes over the T-hook on the side of the battery pack.
Place the battery pack against the canopy or umbrella, pull the silicon strap around the frame, and
secure it on the other T-hook.
Lat
ches
(see reverse side for a diagram of each option)
