USERS GUIDE
12
WPA/WPA2 - Personal
: Wi-Fi devices that use either WPA or WPA2 can
connect to the device. Supported by most Wi-Fi devices. 8 to 63 ASCII characters
needed.
The length of your Wi-Fi password depends on the type that you've selected.
Note:
make sure that your password is not easy to guess.
MAC Filtering
MAC filtering is used to control specific MAC addresses to access.
No filtering
: All terminal devices are allowed to access the router via WIFI
Allow all in list
: Only devices in this list are allowed to access the router via WIFI
Block all in list
: All terminal devices are allowed to access the router via WIFI
except ones in this list.
You can select to add new configuration in the list (no more than 10), edit or delete
exist ones.
WPS
WPS (Wi-Fi Protected Setup) provide a more intuitive way of wireless configuration
between your device and the wireless client. Please make sure that the Wi-Fi-enabled
devices you want to connect support this function.
Enable WPS firstly before you want to use it.
If you select the “PIN” way, input the client‟s PIN to the "Client PIN" frame.
If you select the
“PBC” way, press the "WPS" button on wireless device in 120
seconds to establish WPS connection after you have pressed the "Wi-Fi/WPS" button
on your device or clicked "Save".
Click "Save" to save your settings and start connecting when you select PIN or PBC
way. You can also choose "No Connection" and click "Save" to save your settings
without connecting.
4.3 Router Settings
LAN Settings
This part helps you set your internal network for the device which contains Router IP
Address, Subnet Mask, Hostname, DHCP Server, DHCP IP Pool, and DHCP Lease
Time.
Router IP Address
: The router's IP address on the LAN. The default setting is
