USERS GUIDE
9
4 Advanced Settings
Advanced settings help you to configure Internet connection, Wireless LAN,
Router, System setting, Voice and USB device. After making some modification, you
should click "Save" to save all the settings or you can select "Cancel" to give up the
modification.
4.1 Internet setting
Make sure SIM has been inserted before you start internet settings.
Network Settings
In the part of Network settings, you can configure the network mode and network
selection
.
In “Network mode” setting, you should select the rule for registering the network.
The default selection is “3G Preferred”.
The default Network Selection mode is “Automatic”. When click “Manual”, a
network list will be activated, containing all searched networks. Having selected an
available network from the list, FWT will register to the selected network.
Connection Settings
In the part of connection settings, you can configure the connect mode and
profile.
This device supports two ways to connect to the internet,
“Auto” and “Dial Demand”.
You can modify the mode in connection settings part in Internet,
If “Auto” is selected, the automatic connection will be applied after reboot or input
the Card again.
If “Dial Demand" is selected, it will not connect to network until it detects the
connection from LAN or Wi-Fi. And the device will disconnect automatically when
there is no connection in a period of time (10 minutes default) after connecting.
And in the profile list, you will see the default and other APN configuration. An APN
(Access Point Name) is a reference to the Internet access point on. Different APNs for
the 2G and 3G networks may be required.
