Briggs & Stratton Vanguard 430000, User Manual

Page: 157 / 159

154
14
14
MODELS 580000
ENGINE SPECIFICATIONS
Spark Plug Gap
0.030 in. (0.76 mm)
Valve Clearance – Intake 0.007 in. (0.18 mm)
Valve Clearance – Exhaust 0.007 in. (0.18 mm)
FASTENER TORQUE SPECIFICATIONS TORQUE
Alternator Adjustment Bracket 170 in. lbs. (19 Nm)
Alternator (to bracket) 170 in. lbs. (19 Nm)
Alternator Bracket (to block) 170 in. lbs. (19 Nm)
Camshaft Gear 30 ft. lbs. (41 Nm)
Camshaft Retainer 70 in. lbs. (8 Nm)
Carburetor (to manifold) 70 in. lbs. (8 Nm)
Coil Bracket 180 in. lbs. (20 Nm)
Connecting Rod Nuts 320 in. lbs. (36 Nm)
Crankshaft Pulley 65 ft. lbs. (88 Nm)
Cylinder Head Bolts (8 mm diameter) 25 ft. lbs. (34 Nm)
Cylinder Head Bolts (9 mm diameter) 26 ft.lbs. (35 Nm)
Exhaust Manifold 170 in. lbs. (19 Nm)
Fan Pulley 60 in. lbs. (7 Nm)
Flywheel 35 ft. lbs. (47 Nm)
Governor Actuator 70 in. lbs. (8 Nm)
Governor Control Bracket 70 in. lbs. (8 Nm)
Governor Nut 90 in. lbs. (10 Nm)
Governor Paddle 8 in. lbs. (1 Nm)
Idler Gear 220 in. lbs. (25 Nm)
Intake Manifold 60 in. lbs. (7 Nm)
Main Bearing Screws 45 ft. lbs. (61 Nm)
Oil Drain Plug 220 in. lbs. (25 Nm)
Oil Pan 70 in. lbs. (8 Nm)
Oil Pressure Relief Valve 25 ft. lbs. (34 Nm)
Oil Pump Gear 170 in. lbs. (19 Nm)
Oil Pump Pickup 70 in. lbs. (8 Nm)
Rear Seal Support 50 in. lbs. (6 Nm)
Rocker Arm Assembly 170 in. lbs. (19 Nm)
Rocker Arm Adjustment 95 in. lbs (11 Nm)
Rocker Arm Studs 180 in. lbs. (20 Nm)
Spark Plugs 180 in. lbs. (20 Nm)
Starter 30 ft. lbs. (40 Nm)
Starter Bracket 25 ft. lbs. (34 Nm)
Starter Solenoid 70 in. lbs. (8 Nm)
Starter Thru Bolts 70 in. lbs. (8 Nm)
Timing Gear Case 70 in. lbs. (8 Nm)
Timing Gear Cover (3 different lengths) 70 in. lbs. (8 Nm)
Valve Cover 50 in. lbs. (6 Nm)
Valve Adjustment Screws 95 in lbs. (11 Nm)
Water Pump 170 in. lbs. (19 Nm)