background image

18

19

Engine

OIL (CHECK DAILY - ONLY USE 4 STROKE MOTOR OIL)

This pressure washer is fitted with a Briggs & 

Stratton engine. Please refer to the enclosed Briggs 

& Stratton Engine Manual for details on warranty 

and servicing.

To operate, this pressure washer requires oil in the  

sump, not supplied.  If the pressure washer does not  

have the correct level of oil in the sump, it will not run,  

see note below.
Always check the oil level before starting the  

pressure washer.
Never check or add oil while the pressure washer  

is running.
Used oil is a hazardous waste product and must be 

disposed of properly. Do not discard with household waste. 

Check with your local authorities, service centre, or dealer 

for safe disposal/recycling facilities.

MAINTENANCE SCHEDULE

NOTE: If unsure how to do any of these checks please 

contact our service centre or an authorised service agent.
NOTE:  When performing any maintenance or servicing 

always ensure the pressure washer is stopped and  

turned off.

Daily or Every 8 Hours

•   Clean area around engine muffler and engine controls
•   Clean engine air intake grill

Every 25 Hours or Every Month

•   Clean engine air filter*
•   Clean pre-cleaner, if equipped

Every 50 Hours or Every 3 Months

•   Service exhaust system

Every 200 Hours or Annually

•   Replace spark plug
•   Replace engine air filter
•   Replace pre-cleaner, if equipped
•   Service fuel system
*   In dusty conditions or when airborne debris is present, 

clean more often.

Repairs

Repairs to your pressure washer should only be carried out 

by an authorised service agent.
Call SMG for your closest centre.

Aust. 1300 660 457    N.Z. 0800 474 876.

Summary of Contents for Stanley SXPW9053BS

























Reviews: