Briggs & Stratton 083100, Manual

Page: 94 / 96

SPECIFICATIONS
ENGINE SPECIFICATIONS
0.008 - 0.016 in (0,2 - 0,4 mm) Armature Air Gap
2.44 in (62,00 mm) Bore
8.5:1 Compression Ratio
0.002 - 0.013 in (0,05 - 0,33 mm) Crankshaft End Play
7.75 ci (127 cc) Displacement
2.1 qt (2,0 L) Fuel Tank Capacity
19° BTDC Ignition Timing
18.3 - 21.7 oz (550 - 650 ml) Oil Capacity
0.027 - 0.033 in (0,7 - 0,9 mm) Spark Plug Gap
1.65 in (42 mm) Stroke
0.005 - 0.007 in (0,13 - 0,18 mm) Valve Clearance - Intake
0.005 - 0.007 in (0,13 - 0,18 mm) Valve Clearance - Exhaust
TORQUE FASTENER TORQUE SPECIFICATIONS
71 - 124 lb-in (8 - 14 N-m) Air Cleaner Base / Backplate
35 - 71 lb-in (4 - 8 N-m) Air Cleaner Elbow
71 - 124 lb-in (8 - 14 N-m) Armature
71 - 124 lb-in (8 - 14 N-m) Blower Housing
49 - 80 lb-in (5.5 - 9 N-m) Carburetor Bowl Nut
49 - 80 lb-in (5.5 - 9 N-m) Carburetor Drain Plug
124 - 142 lb-in (14 - 16 N-m) Connecting Rod
71 - 124 lb-in (8 - 14 N-m) Control Bracket
35 - 53 lb-in (4 - 6 N-m) Control Panel Trim
89 - 106 ib-in (10 - 12 N-m) Crankcase Cover
21 - 22 lb-ft (28 - 30 N-m) Cylinder Head
71 - 124 lb-in (8 - 14 N-m) Cylinder Shield
71 - 124 lb-in (8 - 14 N-m) Flywheel Guard
54 - 59 lb-ft (73 - 80 N-m) Flywheel Nut
71 - 124 lb-in (8 - 14 N-m) Fuel Tank
62 - 71 lb-in (7 - 8 N-m) Fuel Tank Outlet
71 - 124 lb-in (8 - 14 N-m) Governor Lever Nut
16 - 22 lb-ft (22 - 30 N-m) Manifold - Exhaust (to head)
27 - 44 lb-in (3 - 5 N-m) Muffler Deflector
71 - 124 lb-in (8 - 14 N-m) Muffler Guard
21 - 22 lb-ft (28 - 30 N-m) Oil Drain Plug
18 - 27 lb-in (2 - 3 N-m) Oil Fill Cap
71 - 124 lb-in (8 - 14 N-m) Oil Gard Sensor
71 - 124 lb-in (8 - 14 N-m) Oil Gard Module
35 - 71 lb-in (4 - 8 N-m) Remote Choke Stud
35 - 71 lb-in (4 - 8 N-m) Remote Choke Nut
71 - 89 lb-in (8 - 10 N-m) Rewind Starter
15 - 22 lb-ft (20 - 30 N-m) Rocker Arm Stud
71 - 124 lb-in (8 - 14 N-m) Rocker Ball Set Screw or Nut
71 - 124 lb-in (8 - 14 N-m) Rocker Cover
19 - 27 lb-ft (26 - 36 N-m) Spark Plug
92 BRIGGSandSTRATTON.COM
14