Briggs & Stratton 040298, Service & Troubleshooting Manual

Page: 16 / 68

12
1
1
Figure 7
8. Locate the mixer ( D ).
Figure 8
9. Remove upper brass cover ( E , Figure 9) and 3/4” cap
( F ).
Figure 9
Figure 10
10. Using a common screwdriver, install supplied plug
into upper chamber ( G , Figure 10).
11. Reinstall brass cover ( E ).
12. Using Insertion Tool #19570, remove existing jet
from lower carburetor inlet ( H ).
13. Install new jet using Insertion Tool #19570.
14. Replace 3/4” brass cap ( F ).
15. Reinstall enclosure front panel and roof.
16. Reinstall 15Amp fuse.
17. Set generator circuit breaker to ON position.
The system is now ready to operate automatically using LP
vapor fuel.
Not
for
Reproduction