Not for
Reproduction
4 BRIGGSandSTRATTON.com.au
Features and Controls
12 Volt DC
Receptacle
230 Volt AC 15 Amp
Receptacle
Circuit
Breaker
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and product
warnings.
Generator
Reset
12 Volt DC Receptacle — Use this receptacle to supply
power for 12 Volt DC accessories that are rated 60 watts
(5 Amp) or less. This receptacle is protected by a push to
reset circuit breaker.
230 Volt AC, 15 Amp Receptacle — May be used to supply
electrical power for the operation of 230 Volt AC, 15 Amp,
single phase, 50 Hz electrical, lighting, appliance, tool, and
motor loads.
Circuit Breaker — A “push to reset” circuit breaker is
provided to protect the generator against electrical
overload when running in parallel.
DC Circuit Breaker — The 12 Volt DC receptacle is
provided with a “push to reset” circuit breaker to protect the
generator against electrical overload.
Generator Reset — Push to reset generator if overloaded.
Low Oil Indicator — A yellow LED light comes on when the
oil in the generator drops below a preset level.
Output Indicator — A green LED light comes on when the
generator is working correctly and producing power at the
receptacles.
Overload Alarm — A red LED light comes on and
cuts power to the receptacles when the generator is
overloaded.
Parallel Operation Port — Use this port with optional
parallel operation kit to allow two generators to run in
parallel.
QPT Switch— Use this switch to turn the QPT on and off.
DC Circuit
Breaker
Low Oil
Indicator
Output
Indicator
Overload
Alarm
Parallel
Operation Port
QPT
Switch
