— 17 —
2384.01 -2020
1.Take off bow part of the seat from the console (see. Fig.10). The bow seat
is fixed by the press-button and the “bur”.
2.Turn off four nuts M8 (with washers and arrester washers) and take off the
upper part of the console body.
3.Install windglass 4 on the upper part of the console body 1 with the help of
bolts 5 (M6x40), polyethylene washers 6 and 7, washers 8, arrester washers
9 and nuts 10 (M6) (See Fig.11, 12). Tighten all the nuts.
4. Tu r n t he h an d r ai l to t he v er ti ca l p o si ti on ( S e e Fi g. 10 , 12 ).
Align the holes in the handrail bearings with the holes in the console body
(upper part) 2, fix the handrail 3 from the inner part with the help of bolts
M8x30 (pipe bearing) and M8x50 (end baring), washers 8x24 and arrester
washers. Tighten all three bolts.
5.Put the base part of the console on the deck of the boat. See the
recommendation for console installation (see page 7). Fix the console with
the help of bolts M8x30, arrester washers and washers 8x24 from the
completeset.Tighten all the bolts.
6.Install the upper part of the console 2 on the base part 1. Fix the upper part
of the console with the help of nuts M8, washers 8x24, arrester washers
(see point.2). Tighten all nuts.
7.Put bow part of the seat on the console. Fix the bow seat by the press-
button and the “bur”.
"SPORT" console installation.
Fig.10
4
6
5
7
9
2
8
Fig.11
4
2
5+6
7
Fig.12
3