Bridgeworks Oresund EFC102200, User Manual, Page: 65 / 84

Note: For mutual CHAP to be performed, the Initiator Secret must be set
on the general tab, and be the same as the one configured on the iSCSI
Gateway.
Note: The use of RADIUS is beyond the scope of this guide.
Once you are satisfied that all advanced options are correct, click OK.
Now click OK in the Add Target Portal window, and the Microsoft iSCSI Initiator shall perform the
discovery. This is usually a quick process, but can take up to a minute with multiple network ports.
Once the discovery is complete, you should see the target listed in the Target Portals list:
Adding an iSNS Server
To discover iSCSI targets using this method, your iSCSI Gateway must be registered with your
designated iSNS server. See Section 4.3.4: Internet Storage Name Service (iSNS) for more
information.
Under iSNS servers , click Add . The following window should appear:
65