Bridgeview BALE KING 8200, Operator'S & Parts Manual

Page: 4 / 63

Bridgeview Manufacturing Inc. 1
INTRODUCTION
Thank you for purchasing a
Bale King bale processor. With the proper operation and
service as outlined in this manual, the Bale King will provide you with years of trouble
free operation.
This is a complete safety, operation and parts manual for the Bale King 8200. The
manual covers in detail how to safely and effectively use your new processor. The
procedures outlined in this manual should be followed to ensure safe operation and
longevity of your machine. The parts manual covers all parts you may need to order in
case of accident or breakdown. Please read completely through this manual before
beginning operation of your new machine.
Safety Precautions
The following safety precautions MUST be followed to ensure safe operation of the
Bale King Bale processor.
•
ALWAYS turn OFF the tractor when leaving the operating platform.
•
DO NOT stand in front of the discharge chute while the machine is running.
•
DO NOT walk or move under the bale forks or wing when in the upward
position, unless the cylinder safety locks are in place.
•
DO NOT enter the machine while in operation.
•
DO NOT clean machine while in operation.
•
DO NOT stick any device into the machine to clear debris while the machine is
in operation.
•
ALWAYS turn off the machine when cleaning the machine, removing twine, or
hooking/unhooking the machine
•
ALWAYS use safety chain when towing the machine on the highway.
•
DO NOT operate if any part of the PTO safety shielding is missing or is not
secured.