Bridgeview BALE KING 8200, Operator'S & Parts Manual

Page: 16 / 63

Bridgeview Manufacturing Inc. 13
Deflector
The Bale King 8200 is equipped with a hydraulic side deflector to change the discharge distance
and distribution. It also comes with a flipping rubber flap for superior control of the spread
pattern.
Moving the deflector to the down position and flipping the rubber down (above left) will allow
the hay to be laid in a windrow, or bunk feeder. Swinging the deflector up will allow you to
spread straw out over a large area. If you also flip the rubber up (above right), you will be able
to "fine tune" the discharge, to control the height and distance.
To flip the rubber, simply pull on the handle and swing into position. Then push the
handle so that the tabs catch in the notches and lock into place.