Bridgeview Bale King 6100, Operator'S & Parts Manual

Page: 28 / 65

Bale King 6100 – Operator and Parts Manual 28 / 65
•
It may take the temper out of the
steel, rendering it weaker.
•
Loose straw and hay remaining in
the machine may ignite causing a fire in
the processor.
•
Can cause Excessive build-up of
melted plastic.
•
May dry out bushings causing
them to wear prematurely.
Bridgeview Manufacturing Inc. VOIDS
warranty if twine burning occurs.
Flail and bushing Replacement
Bridgeview Manufacturing Inc. recommends changing flails in pairs (opposite each
other). Processing bales with broken flails causes the rotor to be out of balance and
excessive vibration may cause machine deterioration.
•
Inspect bolt, bushings, and flail for wear. Replace if necessary. Do not re-use lock
nuts.
•
Tighten bolt so brass bushing will not turn
•
ALWAYS us Bridgeview PN 10433 ¾ X 4 ¾ shoulder bolt. Regular bolts will cause
premature bushing wear.